NESR5-30-4 220 VAC SPG RTN ELEC ACT F05, Electric Spring Return Actuator - Failsafe, Weatherproof, Corrosion Resistant, Series NE-SR5

Product Description

The NIBCO Series NE-SR5 line of electric spring return actuators is designed for use in environments where automatic closing/opening is required upon loss of power. When power is available the device operates like a normal quarter-turn actuator. Under powered operation, the spring pack travels with the movement of the actuator. Under powered stopped conditions, the actuator and spring are held in position via the electric mechanical brake. Under loss of power, the spring is released and drives the actuator to the pre-designated failsafe position. The actuators include a thermostat and heater. The series also features an electric mechanical brake. The enclosures are certified to NEMA Type 1, 2, 3, 3R, 4, 4X, 5 and 12. The NE-SR5 actuator is available with three cycle times -- 10, 15 and 30 seconds; as well as two voltages -- 115 VAC and 220 VAC. Please refer to NIBCO technical data sheets, valve selection guides and catalog for engineering and installation information. Engineered with a modular approach, NIBCO electric and pneumatic actuation systems offer the flexibility to actuate new valves or to retrofit existing valves with unprecedented ease. Both electric and pneumatic actuation systems feature an ISO standard mounting design, assuring long-term industry acceptance. Choose NIBCO flow control products for the most specified, versatile and economical option in commercial and industrial applications. NIBCO actuation products are backed by the NIBCO limited warranty.

• Heater and thermostat installed
• Permanently lubricated steel gear train
• Hardened steel female drive coupling
• Electric mechanical brake
• Operating temperatures -40 Degrees F to +140 Degrees F
• Thermally protected, capacitor run, single phase motor
• Clockwise (CW) spring return
• Two 1/2" NPT conduit entrances
• Captive hex bolts on enclosure
• Adjustable mechanical stop at the failsafe location
• 115 and 220 VAC
• Torque 300 to 700 in/lb
• F04 and F05 DIN/ISO mount and drive
• Enclosure certified to NEMA type 1, 2, 3, 3R, 4, 4X, 5 and 12